|
Natural Gum MV 80 is suitable for printing by Disperse vat, Indigosol & Acid on fabrics like Silk, Polyesters-cotton and Polyester-Rayon blends.
 PROPERTIES
| Constitution |
Mannogalactan / Guar Gum |
| Appearance |
Creamish Powder |
| Paste Appearance |
Yellowish |
| Ionic characteristic |
Anionic |
| Solubility |
Cold water soluble |
| Preservation |
Preservative added to avoid fungus and decomposition of paste and
powder |
SPECIFICATIONS
| Stock paste percent |
8 kg. powder- 92 kg. water |
| pH |
9 - 10 |
| Moisture |
10% max |
| Ash content |
20% max |
| Viscosity of 8% paste |
25,000 – 30,000 cps (Spindle No. 6, 20 RPM by Brooke field Viscometer Model RVT at 25°c) |
| Hydration Time |
3 - 4 hours after 30 to 40 minutes at high speed stirring |
| Stability of stock paste |
5 to 7 days under normal conditions |
CHARACTERISTICS
- Rapid Viscosity
- High Color Yield
- Sharp and Level Prints
- Better Penetration in Prints
- Chocking Free Screens
- Viscosity Stability under shear conditions
- Good wash off properties
PREPARATION
| Stock paste : |
Natural Gum MV - 80 |
: 8Kgs. |
| Water |
:
+ 92Kgs. |
| Total |
:
100Kgs. |
COLD PREPARATION
Take required quantity of gum powder for preparation of stock paste and add slowly under vigorous stirring using high speed stirrer in to cold water for 30 to 40 minutes. Care should be taken to avoid formation of lumps. For complete swelling of gum particles keep stock paste 4 - 6 hours.
PACKAGING
25 Kg. HDPE laminated
paper bag with PE lining
STORAGE
Sealed bag under normal condition for 6 months.
(All the above details have been given in good faith but without warranty) |
|
Natural Tamarind powder is suitable for disperse printing of
polyester fabrics.
PROPERTIES
| Constitution |
Etherified Tamarind |
| Appearance |
Creamish powder |
| Paste appearance |
Yellowish |
| Ionic characteristic |
Non - ionic |
| Solubility |
Cold water soluble |
| Preservation |
Preservative added to avoid fungus and decomposition of paste |
SPECIFICATIONS
| Stock paste percent |
8 kg. powder- 92 kg. water |
| pH |
7 - 8 |
| Moisture |
10% max |
| Ash content |
20% max |
| Viscosity of 8% paste |
24000 - 26000 cps. (Spindle No. 6, 20 RPM by Brook field Viscometer Model
RVT) |
| Hydration Time |
After 30 to 40 minutes at high speed stirring |
| Stability of stock paste |
5 to 7 days under normal conditions |
CHARACTERISTICS
- Sharp and Level prints
- Chocking Free screens
- Good colour value
- High Viscosity
- Economical
- Suitable for disperse discharge printing by Stannous
Chloride
APPLICATIONS
Etherifield Tamarind Powder is suitable for disperse dyes on printing of polyester fabric. It is also suitable for disperse discharge printing by stannous chloride.
PREPARATION
| Stock paste : |
Natural Gum 600 D |
: 8Kgs. |
| Water |
:
+ 92Kgs. |
| Total |
:
100Kgs. |
COLD PREPARATION
Take required quantity of gum powder for preparation of stock paste and
add slowly under vigorous stirring using high speed stirrer into cold
water for 30 to 40 minutes. Care should be taken to avoid formation
of lumps. For complete swelling of gum particles keep stock
paste 4 - 6 hours.
PACKAGING
25 Kg. HDPE laminated
paper bag with PE lining
STORAGE
Sealed bag under normal condition for 6 months.
(All the above details have been given in good faith but without warranty)
|
TOP
