Offers Gum Thickeners from Guar, Tamarind, Tapioca Starch for Printing Textile Dyes, Cotton Fibres Sizing, Construction, Paints, Paper Manufacture by Adgums Private Limited in India. Email : adgums@printing-thickeners.com Call: +91-9825048605   
 
Adgums Private Limited Ahmedabad, India.
Food Grade Gums, Textile Gums, Natural Paper Gums, Textile Sizing Chemicals.
 

Textile Printing Thickeners

Blog
 
  Textile Printing Thickeners
Natural Gum 600
Natural Gum 600 AC
Natural Gum 600 HV
Natural Gum 600 UHV
Natural Gum 120 AC
Natural Gum ST 180
Natural gum ST280
Natural Gum ST 140
Natural Gum ST 500
Natural Gum ST
Natural Gum ST 170
Natural Gum ST 240
Natural Gum ST 380 S
Natural Gum ST 608
Natural Gum ST 610
Natural Gum ST 612
Natural Gum HV50
Natural Gum MV 80
Natural Gum LV 10
Natural Gum LV 12
Natural Gum Lv 14
Natural Gum PLV 8
Natural Gum PLV10
Natural Gum PLV 12
Natural Gum CP 20
Natural Gum CP 25
Natural Gum CP 30
Natural Gum A 28
Natural Gum VA 10
Natural Gum VA 640
Natural Gum 300
Natural Gum ST 100
 
 
 
 
100% EOU
 
ADGUMS Private Limited
Mahalaxmi Compound, 
Opp. Rustom Mills,
Dudheshwar Road,
Ahmedabad - 380 004
Gujarat, India.

Phone
+91-79-25622632, 25625922

Fax
+91-79-25622876


E-mail
adgums@printing-thickeners.com

URL

www.printing-thickeners.com
 
 
  NATURAL GUM 600
  • Anionic etherified polysaccharides for printing disperse dyes on polyester with HT   steam.
  • Direct printing, Disperse Discharge using Sod Formaldehyde Sulfoxylate, Alkali   discharge   and Burn out using NaHSO4/H2SO4.
  • 8% stock concentration, medium viscosity
  • Fabrics: PES, Poly acetate, Triacetate, PES Knit, PES Blanket
 
  NATURAL GUM 600 AC
  • Anionic etherified polysaccharides for printing disperse dyes on polyester with HT   steaming and High Pressure steaming. It can also be used for printing selected   Acid dyes   on Polyamide, Triacetate and PA-Lycra
  • Disperse direct printing, Disperse Discharge using Sod Formaldehyde   Sulfoxylate, Alkali   discharge and Burn out using NaHSO4/H2SO4.
  • 8% stock concentration, medium viscosity and solubility at a broader pH range
  • Fabrics: PES,Polyamide, Poly acetate, Triacetate, PES Knit, PES Blanket
 
  NATURAL GUM 600 HV
  • Anionic etherified polysaccharides for printing disperse dyes on polyester with HT   steaming.
  • Direct printing, Disperse Discharge using Sod Formaldehyde Sulfoxylate, Alkali
  •   discharge   and Burn out using NaHSO4/H2SO4.
  • Cost economic thickener
  • 8% stock concentration, High viscosity
  • Fabrics: PES, Poly acetate, Triacetate, PES Knit, PES Blanket
 
  NATURAL GUM 600 UHV
  • Anionic etherified polysaccharides for printing disperse dyes on polyester with HT   steaming and High Pressure Steam.
  • Direct printing, Alkali discharge and Burn out using NaHSO4/H2SO4.
  • 7% stock concentration, Ultra High viscosity
  • Recommended for combination with CMS, Sod. Alginate or Synthetic thickeners   to achieve   higher performance with economy in usage.
  • Fabrics: PES, Poly acetate, Triacetate, PES Knit, PES Blanket
 
  NATURAL GUM 120 AC
  • Anionic etherified polysaccharides for printing disperse dyes on polyester with HT steaming.   It can also be used for printing selected Acid dyes on Triacetate, Poly amid and PA-Lycra
  • Disperse direct printing, Alkali discharge and Burn out using NaHSO4/H2SO4.
  • 12% stock concentration, low viscosity and solubility at a broader pH range
  • Fabrics: PES, Poly amid, Poly acetate, Triacetate, PES Knit, PES Blanket
 
  NATURAL GUM ST 180
  • Anionic etherified polysaccharides for printing disperse dyes on polyester with HT steaming
  • Higher colour yield than 600, 600AC,600HV and 600UHV
  • Disperse direct printing, Alkali discharge and Burn out using NaHSO4/H2SO4.
  • 8% stock concentration, High viscosity
  • Fabrics: PES, Poly acetate, Triacetate, PES Knit, PES Blanket
 
  NATURAL GUM ST 280
  • Anionic etherified polysaccharides for printing disperse dyes on polyester with HT steaming. It can also be used for printing selected Acid dyes on Triacetate, Poly amid and PA-Lycra
  • Higher colour yield than 600, 600AC,600HV and 600UHV
  • Disperse direct printing, Disperse Discharge using Sod Formaldehyde Sulfoxylate, Alkali   discharge and Burn out using NaHSO4/H2SO4.
  • 8% stock concentration, medium viscosity and solubility at a broader pH range
  • Fabrics: PES, Poly amid, Poly acetate, Triacetate, PES Knit, PES Blanket
 
  NATURAL GUM ST 140
  • - Anionic etherified polysaccharides for printing disperse dyes on polyester with HT   steaming.  It can also be used for printing selected Acid dyes on Triacetate, Poly   amide   and PA-Lycra
  • Higher colour yield than 600, 600AC,600HV and 600UHV
  • Disperse direct printing, Alkali discharge and Burn out using NaHSO4/H2SO4.
  • 8% stock concentration, medium viscosity and solubility at a broader pH range
  • Fabrics: PES, Poly amide, Poly acetate, Triacetate, PES Knit, PES Blanket ( Highly  
  •   recommended for PES and PES knit)
 
  NATURAL GUM ST 500
  • Anionic etherified polysaccharides for printing disperse dyes on polyester with HT   steaming. It can also be used for printing selected Acid dyes on Triacetate, Poly   amide,   and PA-Lycra
  • Higher colour yield than 600, 600AC,600HV and 600UHV, ST 140
  • Disperse direct printing, Alkali discharge and Burn out using NaHSO4/H2SO4.
  • 10% stock concentration, low viscosity and solubility at a broader pH range
  • Fabrics: PES, Poly amide, Poly acetate, Triacetate, PES Knit, PES Blanket. (Highly   recommended for PES and PES knit)
 
  NATURAL GUM ST
  • Anionic etherified polysaccharides for printing disperse dyes on polyester with HT   steaming.  It can also be used for printing selected Acid dyes on Triacetate, Poly   amide   and PA-Lycra
  • Higher colour yield than 600, 600AC,600HV and 600UHV.
  • Disperse direct printing, Alkali discharge and Burn out using NaHSO4/H2SO4.
  • 8% stock concentration, medium viscosity
  • Fabrics: PES, Poly amide, Poly acetate, Triacetate, PES Knit, PES Blanket. (Highly   recommended for PES knit)
   
 
  Next